.....
.....
....

.

Item
Part #
Description
Cost
LV1

Skiworx "Level 1"

Our "Level 1" is perfect for someone who wants to start out small. This kit does require that you remove some of your parts and send them to us for modding. This kit when installed properly can give gains of anywhere form 3-5 MPH and a lot of acceleration. We will need your Carbs, exhaust stinger and pump. The mods will include our CV carb mod, the Skiworx Stinger mod and we will install a blue printed Solas 16/20 impeller and blue print the pump, install new bearings and seals. The kit will also include 42 CC cylinder heads.

 

  • Skiworx CV Carb Mod
  • Skiworx Stinger Mod
  • Aftermarket Head (42 CC)
  • Blue printed Solas 16/20 (Installed)
  • Pump Blue Printed with New bearings and Seals
     

Note: This is a pump gas kit. Before sending any parts please click here .

$1,250
LV1.5 

Skiworx "Level 1.5"

Includes everything from our "Level 1" plus we include our flat top pistons with our custom domes. This kit will add even more acceleration and some top speed. We also recommend our Skiworx "stealth" exhaust mod with this kit.

  • Level 1
  • Custom Flat Top Pistons
  • Flat Top Domes
  • All Gaskets as Necessary
     

 

Note: This kit can be ordered as Pump or Race gas. Before sending any parts please click here .

1,879
Upgrade
LVL1.5DM
Skiworx "Level 1 to 1.5" Upgrade W/ Domes
$746
Upgrade
LVL1.5MH
Skiworx "Level 1 to 1.5" Upgrade milling your heads.
$800
LVL1.5PK

Skiworx "Level 1.5"& "Level 2" Complete Piston Kit

Includes everything needled to do a complete top end for a "level 1.5" or "Level 2"

 

$629
LVL1.5SPK
Skiworx "Level 1.5"& "Level 2" Single Piston Kit
$209
LVL2 

Skiworx "Level 2"

Includes everything from our "level 1" plus flat top piston with all gaskets, cylinder decking and spacer plates for under the cylinder. This kit will change your port timing. We do not recommend this kit unless you are using aftermarket carb's, "Stealth" exhaust or triple pipes!

  • Level 1
  • Custom Flat Top Pistons
  • Cylinders Decked
  • Base Gasket Spacers
  • All Gaskets as Necessary
     

Note: This kit can be ordered as Pump or Race gas. Before sending any parts please click here .

$2,021
Upgrade
LVL2DM
Skiworx "Level 1 to 2" Upgrade W/ Domes
$921
Upgrade
LVL2MH
Skiworx "Level 1 to 2" Upgrade Milling Your Heads
$979
TPK

Skiworx Triple Pisser Kit

To fix a Kawasaki blunder we designed a water bypass kit that will allow the rider to watch the cooling bypass of all three of their cylinders. From the factory Kawasaki only installed one in the front and the rest in the rear (where no one can see). Our kit not only relocates them all to the front, but it includes new head fittings that are straight not 90 degrees which can clog up. This is a must have for any Kawasaki 1200!

Note: This is a complete kit we have taken the guess work out of it. Remember the head fitting MUST have the correct ID or the craft will go into limp mode for an over heat condition.

$85
SMOD

Skiworx Stinger Exhaust Mod

The Skiworx Stinger mod will help your Ultra accelerate much quicker. This mod is simple to install. It does require you to remove your stinger and send it to us for the modification. The modded stinger section will be sent back along with a complete kit and detailed install instructions.

Before sending any parts please click here .

$175
SSEM

Skiworx "Stealth"Complete Exhaust Mod

The Skiworx "Stealth" mod includes a complete modification to your entire exhaust system (manifold, chamber and stinger). Also included in this package is our famous Skiworx Stinger Mod. If you already have our Stinger mod we can upgrade your system. Please call for price.

Before sending any parts please click here .

$700
MC

Skiworx CV Carb Mod

Our exclusive Skiworx CV carb mod is the real secret to making power with the Kawasaki 1200. Over the years many have tried to use aftermarket flame arrestors with CV carbs and have seen disastrous results. With this CV carb mod you will now be safe to use PROK (modded by us) FA's. You will need to send us your carbs and stock flame arrestor for this mod. If PROKS will be used we will not need your stock FA.

Note: We do not sell any parts for this mod outright. We also don't recommend this mod unless the compression has been raised. Before sending any parts please click here .

$250
PROK

PROK Flame Arrestor With Adapter

These are the only flame arrestors we recommend to use with the CV carbs. We mod them to work correctly.

$65
TEK

Complete Kawasaki 1200 Top End Kit

WSM. These kits include pistons, rings, pins, cir clips base and head gaskets and top end bearings.

Note: We use these same kits in our Level 1.5 and 2 Engine Kits

$470
SKIFP

Skiworx Kawasaki 1200 Flat Top Piston

Our flat top kawasaki piston when used with our domes will add great acceleration to you ski. Includes piston, rings, pin and cir clips Must use with our custom dome. We can also mill cast heads to match.

$210
PBR

Skiworx Blue Print Pump Work

One of the biggest performance gains on an Ultra 150 is in the pump area. The mixed flow pump uses shims to set impeller clearance. From the factory this clearance along with inferior pump seals can cause a huge loss in performance. Our blue print work includes proper shimming and installation of bearings and the correct seals.

Note: Price does not include bearings and seals. Before sending any parts please click here .

$125
BK

Skiworx Ultra 150 Pump Bearing Kit

Kawasaki has had major issues with the Ultra 150 bearings and seals since day 1. The problem has been inferior seal design. This problem can now be fixed with our bearing and seal kit. We prefer to install these parts in house, please call for more info.

$75
SOL

Solas 16/20 Blue Printed by Us

Not all Solas are created equal. We check all impellers before shipping.

Note: The Ultra 150 uses a mixed flow pump that uses shims to clearance the impeller. For best performance we recommend having your pump set up by us. See our blue print pump rate above.

$255
UMIB

Handle Bars

Note: these will require modifaction to your stock stem and additnoal parts.(Black Only)

$63
BFT

Billet Finger Throttle

(Black or Polished Only)

$63
BTM
Black Tip Mats
$79

Ultra 150

We carry many parts for the Ultra 150, if you don't see what you need please contact us.

 

Home | Service | Contact Us | Catalog | Tech Tips
| Limited Warranty | Return Policy |